Cisco 7200 Ios Image Download
- Gns3 Ios Images 7200
- Ios Images For Gns3
- Cisco Router 7200 Ios Image Download
- Cisco 7200 Ios Image Download Pc
- Cisco Ios Download For Gns3
- Cisco 7200 Router Gns3
Table Of Contents
This entry was posted in Cisco, GNS3 and tagged Cisco IOS emulation, download GNS3, GNS 3 and Cisco 1700 2600 7200 IOS in one pack, GNS IOS, GNS3, Graphical Network Simulator (GNS), How to Use GNS3, Network Simulator based on Cisco IOS. Download C3725 IOS image for GNS3 link 1; Download C3745 IOS image for GNS3; Download 2600 IOS image for GNS3; Download C1700 IOS image for GNS3; Download c7200 IOS image for GNS3; Note: Some of the above-mentioned links may not work because it might be possible that their URLs are changed or the IOS images are removed from the hosting server. Eve-ng is a platform where you can add Cisco routers images and can do unlimited practice for your certification. In Eve-ng you can practice lab up to CCIE level. We will tell you step by step process of How to add Cisco IOS images to EVE-ng. Supported Dyanamips Images 2. Download Cisco IOS (Dyanamips Images) 3. Importing Cisco IOS.
Cisco 7200 Series Routers Boot Images Information
Document Revision History
Gns3 Ios Images 7200
The Document Revision History, beginning with OL-3876-02, records technical changes to this document.
Date | ||
|---|---|---|
OL-3876-07 | July, 2007 | Adding Cisco 7201 and PA-T3/E3-EC information. |
OL-3876-06 | December, 2006 | Adding PA-MC-T3-EC information, and additional NPE-G1 and NPE-G2 information. |
OL-3876-05 | November, 2006 | Adding VPN Service Adapter information, clarifying VAM support, older I/O controller with newer port adapter information, and clarification of software releases. |
OL-3876-04 | May, 2006 | Adding NPE-G2 and its new boot image information. |
OL-3876-03 | April, 2006 | Adding Cisco IOS Release 12.0 (22) S kboot information and Cisco IOS Release 12.0(32)S2 c7200-mboot-mz information. |
OL-3876-02 | Feb. 3, 2005 | Adding PA-POS-1OC3 and SA-VAM2+ information. |
The Cisco 7200 series routers have three basic boot images that support different hardware options. The three images are the standard c7200-boot-mz boot image, the c7200-kboot-mz boot image, and the c7200-mboot-mz image. The c7200-kboot-mz image was released in October, 2000 and is larger than the standard c7200-boot-mz image because it supports newer hardware that is not supported in the c7200-boot-mz image.
The c7200-kboot-mz image is too large to fit in the Flash (bootflash) memory of the older I/O controllers and cannot stored on them; however the image can be used if stored on an external flash device and the router is configured with the boot bootldr <device>:<image name> configuration command. Using newer port adapters—that require the c7200-kboot-mz image—with older I/O controllers that use the standard boot image, can result in a system that is unable to boot from a network (TFTP) server. The c7200-mboot-mz image was released in April, 2006 on Cisco IOS Release 12.0(32)S2 and contains support for a small, specific set of port adapters and older I/O controllers. The c7200-mboot-mz image is small enough to fit on older I/O controller Flash (bootflash) memory. The c7200-mboot-mz image is supported on later releases of 12.0(32)S2 also. See the 'c7200-mboot-mz Image Information' section.
The sections and tables in this document provide information about which I/O controllers, port adapters, and service adapters are supported by each boot image.
Using newer port adapters—that require the c7200-kboot-mz image—with older I/O controllers that use the standard boot image, can result in a system that is unable to boot from a network (TFTP) server. See Table 8 for information on using other devices from which to boot.
The c7200-kboot-mz image is supported in some Cisco IOS releases, such as E and T. It is supported in Cisco IOS Release 12.0 (22) S and later releases of 12.0 S, although PA-A3-8T1IMA and PA-A3-8E1IMA are not supported. This document is intended to give the reader an indication of which port adapters are supported in the standard 12.0 S boot image.
Contents
The following boot image information is in this document:
•Port Adapters and I/O Controllers
Table 1 through Table 14 provide information about which port adapters and service adapters and I/O controllers are supported by each boot image.
•Network Processing Engines
This section provides information on which network processing engines are support by each boot image.
•Cisco 7201 Router
This section provides information on the boot image that supports the Cisco 7201 router.
•c7200-mboot-mz Image Information
This section provides a listing of port adapters and I/O controllers supported by the c7200-mboot-mz image.
•Sample boot image output is in the 'Sample Standard Boot Image' section and the 'Sample kboot Image' section.
•The 'Error Messages' section provides samples of two error messages.
For additional information on boot images, see the 'Related Documentation' section.
Port Adapters and I/O Controllers
This section provides boot image information for port adapters and I/O controllers.
Using newer port adapters—that require the c7200-kboot-mz image—with older I/O controllers that use the standard boot image, can result in a system that is unable to boot from a network (TFTP) server. See Table 8 for information on using other devices from which to boot.
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | 12.1 E and later releases of 12. 1E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
C7200 VSA | No | No | No |
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3 and 12.4 |
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | 12.1 E and later releases of 12. 1E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
PA-A1-OC3MM | Yes | Yes | Yes |
PA-A1-OC3SMI | Yes | Yes | Yes |
PA-A2-4E1XC-OC3SM | Yes | Yes | Yes |
PA-A2-4E1XC-E3ATM | Yes | Yes | Yes |
PA-A2-4E1YC-OC3SM | Yes | Yes | Yes |
PA-A2-4E1YC-E3ATM | Yes | Yes | Yes |
PA-A2-4T1C-OC3SM | Yes | Yes | Yes |
PA-A2-4T1C-T3ATM | Yes | Yes | Yes |
PA-A3-T3 | Yes | Yes | Yes |
PA-A3-E3 | Yes | Yes | Yes |
PA-A3-OC3MM | Yes | Yes | Yes |
PA-A3-OC3SMI | Yes | Yes | Yes |
PA-A3-OC3SML | Yes | Yes | Yes |
PA-A3-8T1IMA | No | No | Yes |
PA-A3-8E1IMA | No | No | Yes |
PA-A6-OC3-MM | No | Yes | Yes |
PA-A6-OC3-SMI | No | Yes | Yes |
PA-A6-OC3-SML | No | Yes | Yes |
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3 and 12.4 |
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | Supported on c7200-kboot-mz Image ( 12.1 E and later releases of 12.x1E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
PA-1C-E | No | Yes | Yes |
PA-1C-P | No | Yes | Yes |
PA-4C-E3 | No | No | No |
PA-FC-1G | No | Yes | Yes |
Ios Images For Gns3
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3 and 12.4 3PA-4C-E is not supported in either boot image, although it is supported in full Cisco IOS images on the Cisco 7200 platform. |
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | 12.1 E and later releases of 12. 1E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
PA-SRP-OC12MM | No | Yes | Yes |
PA-SRP-OC12SI | No | Yes | Yes |
PA-SRP-OC12SML | No | Yes | Yes |
PA-SRP-OC12SMX | No | Yes | Yes |
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3 and 12.4 |
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | 12.1 E and later releases of 12. 1E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
PA-F-MM | Yes | Yes | Yes |
PA-F-SM | Yes | Yes | Yes |
PA-F/FD-MM | Yes | Yes | Yes |
PA-F/FD-SM | Yes | Yes | Yes |
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3 and 12.4 |
Gigabit Ethernet, Fast Ethernet, Ethernet Port Adapters | Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | 12.1 E and later releases of 12. 1E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B |
|---|---|---|---|
PA-12E/2FE | Yes | Yes | Yes |
PA-8E | Yes | Yes | Yes |
PA-5EFL | Yes | Yes | Yes |
PA-4E | Yes | Yes | Yes |
PA-2FEISL-TX | Yes | Yes | |
PA-2FEISL-FX | Yes | Yes | Yes |
PA-FE-TX | Yes | Yes | Yes |
PA-FE-FX | Yes | Yes | Yes |
PA-100VG | Yes | Yes | Yes |
PA-DSIC | Yes | Yes | Yes |
PA-GE | Yes | Yes | Yes |
PA-2FE-TX | No | Yes | Yes |
PA-2FE-FX | No | Yes | Yes |
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3 and 12.4 |
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | 12.1 E and later releases of 12. 1E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
PA-H (Rev. B) | Yes | Yes Tekken: Dark Resurrection iso for Playstation Portable (PSP) and play Tekken: Dark Resurrection on your devices windows pc, mac,ios and android! Tekken dark resurrection psp iso. Download Tekken - Dark Resurrection ISO ROM for PSP to play on your pc, mac, android or iOS mobile device. Download Tekken: Dark Resurrection ROM/ISO for the PlayStation Portable. The game ROM file comes in ISO format. This game ID is ULUS-10139. It's the USA version and comes in English language. Overview Tekken: Dark Resurrection is the seventh game in the Tekken series. This game holds a few firsts for the series, including the first appearances of the franchise on PSP and PlayStation Network, as well as being the first digitally distributed and fully online game for the series. Jul 23, 2018 Tekken: Dark Resurrection is the seventh game in the Tekken series. This game holds a few firsts for the series, including the first appearances of the franchise on PSP and PlayStation Network, as well as being the first digitally distributed and fully online game for the series. This game is made by Bandai Namco Games. | Yes |
PA-2H (Rev B) | Yes | Yes | Yes |
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3, and 12.4 |
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | Supported on c7200-kboot-mz Image 12.1 E and later releases of 12.1E 12.2 and later releases of 12. 3 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
C7200-I/O-FE4 | No | No | No |
C7200-I/O4 | No | No | No |
C7200-I/O-GE+E | No | Yes | Yes |
C7200-I/O-2FE/E | No | Yes | Yes |
1Using newer port adapters—that require the c7200-kboot-mz image—with older I/O controllers that use the standard boot image, can result in a system that is unable to boot from a network (TFTP) server. 2Releases 12.2T, 12.3T, and 12.4T 3Releases 12.3 and 12.4 4The kboot images will not fit on the bootflash on C7200-I/O-E and C7200-I/O, however the kboot image will recognize and function with the I/O controllers. The kboot image needs to be stored on an external flash device (slot0:, slot1:, disk0:, disk1: or disk2:) and then pointed to by the configuration command: boot bootldr <device>:<image name> |
For information on storing or copying a boot image to an external flash device, see the CompactFlash Disk, Flash Disk, and Flash Memory Card Informationchapter of the Memory Replacement Instructions for the Network Processing Engine or Network Services Engine and Input/Output Controller document, and the Using the Flash Disk document.
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | 12.1 E and later releases of 12. 1E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
PA-CT3/4T1 | Yes | Yes | Yes |
PA-2CE1/PRI-75 | Yes | Yes | Yes |
PA-2CE1/PRI-120 | Yes | Yes | Yes |
PA-2CT1/PRI | Yes | Yes | Yes |
PA-MC-E3 | Yes | Yes | |
PA-MC-T3 | Yes | Yes | Yes |
PA-MC-2T3+ | Yes | Yes | Yes |
PA-MC-2E1/120 | Yes | Yes | Yes |
PA-MC-8E1/120 | Yes | Yes | Yes |
PA-MC-4T1 | Yes | Yes | Yes |
PA-MC-8T1 | Yes | Yes | Yes |
PA-MC-T3-EC | No | No | No |
PA-MC-8DSX1 | Yes | Yes | Yes |
PA-4B-U | Yes | Yes | Yes |
PA-8B-ST | Yes | Yes | |
PA-MC-8TE1+ | No | Yes | Yes |
PA-MC-STM-1 | No | Yes | Yes |
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3 and 12.4 |
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | 12.1 E and later releases of 12. 1E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
PA-E3 | Yes | Yes | Yes |
PA-2E3 | Yes | Yes | Yes |
PA-T3 | Yes | Yes | Yes |
PA-T3+ | Yes | Yes | Yes |
PA-2T3 | Yes | Yes | |
PA-2T3+ | Yes | Yes | Yes |
PA-T3/E3-EC | No | No | No |
PA-4E1G-75 | Yes | Yes | Yes |
PA-4E1G-120 | Yes | Yes | Yes |
PA-8T-X21 | Yes | Yes | Yes |
PA-8T-V35 | Yes | Yes | Yes |
PA-8T-232 | Yes | Yes | Yes |
PA-4T | Yes | Yes | Yes |
PA-4T+ | Yes | Yes | Yes |
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3 and 12.4 |
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | Supported on c7200-kboot-mz Image 12.1 E and later releases of 12.x E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
SA-Comp/1 | Yes | Yes | Yes |
SA-Comp/4 | Yes | Yes | Yes |
SA-Encyrpt | No | Yes | Yes |
SA-ISA (DES/3DES) | No | Yes | Yes |
SA-VAM | No | Yes3 | |
SA-VAM2 | No | Yes3 | Yes3 |
SA-VAM2+ | No | Yes3 | Yes3 |
C7200 VSA (see Table 1) |
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3 and 12.4 3The mboot, kboot, and boot images do not support any encryption features. These cards are listed as not supported in the *boot images. However, the cards may be recognized, or an error message may be printed, depending on the card that is installed. |
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | 12.1 E and later releases of 12. 1E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
PA-POS-1OC3 | No | Yes | Yes |
PA-POS-2OC3 | No | Yes | Yes |
PA-POS-OC3-MM | Yes | Yes | Yes |
PA-POS-OC3SMI | Yes | Yes | Yes |
PA-POS-OC3SML | Yes | Yes |
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3 and 12.4 |
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | 12.1 E and later releases of 12. 1E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
PA-4R | Yes | Yes | Yes |
PA-4R-FDX | Yes | Yes | Yes |
PA-4R-DTR | Yes | Yes | Yes |
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3 and 12.4 |
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | 12.1 E and later releases of 12. 1E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
PA-MCX-2TE1 | No | No | Supported only on 12.1T and later releases of 12.T1 and 12.2 and later releases of 12.2 |
PA-MCX-4TE1 | No | No | Supported only on 12.1T and later releases of 12.T1 and 12.2 and later releases of 12.2 |
PA-MCX-8TE1 | No | No | Supported only on 12.1T and later releases of 12.T1 and 12.2 and later releases of 12.2 |
PA-MCX-8TE1+ | No | No | Supported only on 12.1T and later releases of 12.T1 and 12.2 and later releases of 12.2 |
PA-VXA-1TE1-24+ | No | No | Supported only on 12.1T and later releases of 12.T1 and 12.2 and later releases of 12.2 |
PA-VXA-1TE1-30+ | No | No | Supported only on 12.1T and later releases of 12.T1 and 12.2 and later releases of 12.2 |
PA-VXB-2TE1 | No | No | Supported only on 12.1T and later releases of 12.T1 and 12.2 and later releases of 12.2 |
PA-VXC-2TE1 | No | No | Supported only on 12.1T and later releases of 12.T1 and 12.2 and later releases of 12.2 |
PA-VXB-2TE1+ | No | No | Supported only on 12.1T and later releases of 12.T1 and 12.2 and later releases of 12.2 |
PA-VXC-2TE1+ | No | No | Supported only on 12.1T and later releases of 12.T1 and 12.2 and later releases of 12.2 |
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3 and 12.4 |
Network Processing Engines
This section provides boot image information for the network processing engines, NPE-G1—Table 15, and NPE-G2— router, Table 16.
Supported on Standard c7200-boot-mz Image (12.0 S) | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | Supported on c7200-kboot-mz Image 12.1 E and later releases of 12.1 E 12.2 and later releases of 12. 3 12.2B and 12.3B and later releases of 12.2B and 12.3B | |
|---|---|---|---|
NPE-G14 | No | Yes [12.0(28)S] | Yes [12.0(28)S] |
1Only network processing engines beginning with the NPE-G1 carry I/O controller functionality. 2Releases 12.2T, 12.3T, and 12.4T 3Releases 12.3 and 12.4 4When no I/O controller is present in a Cisco 7200 VXR chassis with an NPE-G1 or NPE-G2 installed, the NPE-G1 or NPE-G2 takes over the functionality of the I/O controller. |
Note The NPE-G2 kboot image begin with c7200p. This is different from the previous Cisco 7200 series routers boot image naming conventions. See Table 16 below.
Supported on Standard c7200-boot-mz Image | Supported on c7200-kboot-mz Image (12.0 (22) S and later releases of 12.0 S) | Supported on c7200-kboot-mz Image 12.1 E and later releases of 12.x1E 12.2 and later releases of 12. 2 12.2B and 12.3B and later releases of 12.2B and 12.3B | 12.4(11)T and later releases of 12.4T 12.4XD and later releases of 12.4XD | |
|---|---|---|---|---|
NPE-G2 | No | No | No | Yes3 |
1Releases 12.2T, 12.3T, and 12.4T 2Releases 12.3 and 12.4 3The VPN Service Adapter (VSA) is not supported on the c7200p-kboot-mz image. |
Cisco 7201 Router
The Cisco 7201 router uses the same boot image as the NPG-G2— c7200p-kboot-mz on the following Cisco IOS Releases:
•Cisco IOS Release12.4(4)XD7 and later releases.
•Cisco IOS Release12.2(31)SB5 and later releases.
•Cisco IOS Release12.4(15T1 and later releases.
c7200-mboot-mz Image Information
The c7200-mboot-mz image was released in April, 2006 on Cisco IOS Release 12.0(32)S2 and contains support for a small, specific set of port adapters and older I/O controllers. The c7200-mboot-mz image is small enough to fit on older I/O controller Flash (bootflash) memory. The c7200-mboot-mz image is supported on later releases of 12.0(32)S also.
Only the following port adapters and I/O controllers are supported on the c7200-mboot-mz image:
•PA-A3-OC3
•PA-A6-OC3
•PA-2FE
•PA-FE
•PA-MC-4T1
•PA-POS-OC3
•PA-4E
•PA-8E
•C7200-I/O
•C7200-I/O-FE
•C7200-I/O-2FE/E
•C7200-I/O-GE/E
Error Messages
The following error messages are displayed on bootup when a new I/O controller is used with the standard boot image (c7200-boot-mz).
The following error message is displayed with the C7200-I/O-2FE/E I/O controller and the standard boot image (c72000-boot-mz):
The following error message is displayed with the Cisco 7200-I/O-GE/E I/O controller and the standard boot image (c72000-boot-mz):
Sample Standard Boot Image
Sample kboot Image
Related Documentation
•Complex configuration procedures are beyond the scope of this publication and can be found in the modular configuration and modular command reference publications in the Cisco IOS software configuration documentation set that corresponds to the software release installed on your Cisco hardware.
•For more information about Boot Images, see Field Notice:Oversized Cisco 7200/uBR 7200 Boot Image, at
http://www.cisco.com/en/US/partner/ts/fn/610/fn61128.html
•For field-replaceable units (FRUs) documentation, see the Field-Replaceable Units section on the Cisco 7200 VXR Product Overview page at: http://www.cisco.com/en/US/docs/routers/7200/install_and_upgrade/7200vxr_install_config/5013ov.html
•For port adapter documentation, see http://www.cisco.com/en/US/partner/docs/routers/7200/roadmaps/7200_series_port_adapter_doc_roadmap/3530.html
•For troubleshooting information, see http://www.cisco.com/en/US/docs/routers/7200/roadmaps/7200_series_trblshoot_doc_roadmap/3518.html
•For international agency compliance, safety, and statutory information for wide-area network (WAN) interfaces for the Cisco 7200 VXR series routers, refer to the document Cisco 7200 Regulatory Compliance and Safety Information at
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised technical documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.
This document is to be used in conjunction with the documents listed in the 'Related Documentation' section.
CCDE, CCENT, CCSI, Cisco Eos, Cisco Explorer, Cisco HealthPresence, Cisco IronPort, the Cisco logo, Cisco Nurse Connect, Cisco Pulse, Cisco SensorBase, Cisco StackPower, Cisco StadiumVision, Cisco TelePresence, Cisco TrustSec, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card, and One Million Acts of Green are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Lumin, Cisco Nexus, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast, EtherSwitch, Event Center, Explorer, Follow Me Browsing, GainMaker, iLYNX, IOS, iPhone, IronPort, the IronPort logo, Laser Link, LightStream, Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels, PowerTV, PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are registered trademarks of Cisco and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1002R)
.
GNS3 Supported IOS Images Download – There are the most stable and most suitable running Cisco IOS images for use in GNS3. These Cisco Router IOS images are the most used images when designing network with GNS3.
GNS3 Supported IOS Images Download
With GNS3, you can build complex topologies using these Cisco IOS images. Cisco Router IOS images can also be obtained from the manufacturer’s website or from any source. However, as you prepare for the Cisco exams with GNS3, we share the most appropriate Cisco IOS images for you to use.
You need to know the Minimum Ram requirements to run Cisco Router or Switch IOS images. If you set a value for a Cisco Router IOS image that is larger than the Minimum RAM requirement, you may experience performance problems because your computer uses more processor. As a result, you can also set a higher Ram value for Cisco Routers on GNS3.
The IDLE-PC value on GNS3 is set so that a Router or Switch does not force your system. You can set the IDLE-PC value while adding a new network device in GNS3. The IDLE-PC value will be determined according to the hardware specifications of your computer.
The most suitable Cisco IOS images that can be used on the GNS3 are the c3640, c3660, c3725, c3745 and c7200 IOS images. It is a good idea to note the minimum RAM requirements of these GNS3 supported IOS images. There are several additional Cisco IOS images below. For example, if the c1700 series router is used, it will be inadequate if you design a more complex network.
Download Cisco IOS Images for GNS3
You can download the GNS3 supported Cisco IOS images to your computer by clicking the related buttons below.
Download Cisco IOS c1700 for GNS3
1 – IOS Version: 12.4.25d
File Name: c1700-adventerprisek9-mz.124-25d.bin
Minimum RAM: 128MB
2 – IOS Version: 12.4.15T14
File Name: c1700-adventerprisek9-mz.124-15.T14.bin
Minimum RAM: 160MB
Download Cisco IOS c2600 for GNS3
1 – IOS Version: 12.4.25d
File Name: c2600-adventerprisek9-mz.124-25d.bin
Minimum RAM: 128MB
2 – IOS Version: 12.4.15T14
File Name: c2600-adventerprisek9-mz.124-15.T14.bin
Minimum RAM: 256MB
Download Cisco IOS c2691 for GNS3
1 – IOS Version: 12.4.25d
File Name: c2691-adventerprisek9-mz.124-25d.bin
Minimum RAM: 192MB
2 – IOS Version: 12.4.15T14
File Name: c2691-adventerprisek9-mz.124-15.T14.bin
Minimum RAM: 256MB
Download Cisco IOS c3640 for GNS3
IOS Version: 12.4.23
File Name: c3640-a3js-mz.124-23
Minimum RAM: 128MB
Download Cisco IOS c3660 for GNS3
IOS Version: 12.4.19
File Name: c3660-a3jk9s-mz.124-19.bin
Minimum RAM: 192MB
Download Cisco IOS c3725 for GNS3
1 – IOS Version: 12.4.25d
File Name: c3725-adventerprisek9-mz.124-25d.bin
Minimum RAM: 128MB
2 – IOS Version: 12.4.15T14
File Name: c3725-adventerprisek9-mz.124-15.T14.bin
Minimum RAM: 256MB
Download Cisco IOS c3745 for GNS3
1 – IOS Version: 12.4.25d
File Name: c3745-adventerprisek9-mz.124-25d.bin
Minimum RAM: 256MB
2 – IOS Version: 12.4.15T14
File Name: c3745-adventerprisek9-mz.124-15.T14.bin
Minimum RAM: 256MB
Download Cisco IOS c7200 for GNS3
1 – IOS Version: 15
File Name: c7200-adventerprisek9-mz.152-4.M7.bin
Minimum RAM: 512MB
Cisco Router 7200 Ios Image Download
2 – IOS Version: 12.4.25g
File Name: c7200-a3jk9s-mz.124-25g.bin
Minimum RAM: 256MB
3 – IOS Version: 12.4.24T5
File Name: c7200-adventerprisek9-mz.124-24.T5
Minimum RAM: 256MB
Cisco 7200 Ios Image Download Pc
How to Add Cisco IOS Images to GNS3? ⇒ Video
To add the Cisco Router IOS images you downloaded to GNS3, you can watch the video below and also subscribe to our YouTubechannel to support us…
Final Word
How to Download GNS3 Supported IOS Images? – In this article, we have shared the Cisco Router IOS images for GNS3. We recommend that you use these Cisco IOS images because some Cisco Router IOS images may not run on GNS3. Thanks for following us!
If this article is helpful, send me feedback by commenting! Thanks in advance, take care of yourself!
Also, you can add to browser bookmarks by pressing the CTRL+D to read this article later!
Articles Related to Download GNS3 Supported IOS Images
Cisco Ios Download For Gns3
[su_box title=”Related Articles” box_color=”#242424″ radius=”0″]
♦ How to Add Cisco IOS to GNS3?
♦ Cisco Router Basic Configuration
♦ How to Configure Interface on Cisco Router?
♦ How to Assign IP Address to Cisco Router in GNS3?
♦ How to Configure Cisco Switch Step by Step in GNS3?
[/su_box]
Products Related to Download GNS3 Supported IOS Images
Cisco 7200 Router Gns3
[su_box title=”Related Products” box_color=”#242424″ radius=”0″]
[/su_box]